 The TU26 series slant bed design, whose saddle slideways and tailstock guideways are independent, has a unibody slant construction with four 45-deg. slanted quideways. This double closed-beam construction is used to increase the bed rigidity and decreasing excessive weight. The headstock has been assembled so that it is parallel with the 45 deg. slant bed guideways to minimize thermal displacement. By using combinations of a geared AC spindle motor, full power cutting can be performed over a wide range of spindle speed.
OUTSTANDING FEATURES
- Rigid and rugged 4-way bed.
- Strong 150mm (6”)-diameter main spindle.
- Stepless spindle-changes in low-speed range and high-speed range (between 42 and 4,000rpm) TU30.
- 45-degree slant bed facilitates efficient chip disposal.
- Doors open from both sides to assure easy operability.
- NC panel slides to the right or left to provide operational convenience.
- Independent cutting-fluid tank
|
TU SERIES
|
TU26
|
TU26
|
TUR26
|
TUR26
|
|
Chuck size
|
12”,15”
|
12”,15”
|
12”,15”
|
12”,15”
|
|
Bar capacity
|
3.0
|
3.0
|
3.0
|
3.0
|
|
Max. swing over bed
|
19.6
|
19.6
|
19.6
|
19.6
|
|
Max. swing over cross slide
|
13.7
|
13.7
|
13.7
|
13.7
|
|
Max. turning length
|
25.5”
|
39.3”
|
25.5”
|
39.3”
|
|
Main spindle speed
|
8-4000
|
8-4000
|
8-4000
|
8-4000
|
|
Geared head
|
2 speed
|
2 speed
|
2 speed
|
2 speed
|
|
Rotary tool spindle
|
|
|
125-3150
|
125-3150
|
|
Power main Hp
|
24.5/20
|
24.5/20
|
24.5/20
|
24.5/20
|
|
